Customization: | Available |
---|---|
After-sales Service: | 24 Hours |
Warranty: | 18 Months |
Suppliers with verified business licenses
Audited by an independent third-party inspection agency
NO. | Specification | 630(8/P) | 800(10/P) | 1050(14 /P) | 1350(18/P) | 1600(21/P) | ||||||||||||||||||
Capacity (kg) | 630 | 800 | 1050 | 1350 | 1600 | |||||||||||||||||||
Speed (m/s) | 1 | 1.5 | 1.75 | 1 | 1.5 | 1.75 | 2 | 1 | 1.5 | 1.75 | 2 | 2.5 | 1 | 1.5 | 1.75 | 2 | 2.5 | 1 | 1.5 | 1.75 | 2 | 2.5 | ||
1 | Operation System | full collective selection operation | ||||||||||||||||||||||
2 | Driving System | VVVF | ||||||||||||||||||||||
3 | Door Operator System | VVVF | ||||||||||||||||||||||
4 | Traction Machine | Permanent Magnet Synchronous Gearless type | ||||||||||||||||||||||
5 | Control System | CTRL80 | ||||||||||||||||||||||
6 | Communication | canbus serial communication | ||||||||||||||||||||||
7 | Parallel Elevators | 2 units(Optional) | ||||||||||||||||||||||
8 | Group Control Elevators | 3-8 units(Optional) | ||||||||||||||||||||||
9 | Wide Car | Car Dimension mm(width*depth) | 1400*1100*2500 | 1400*1350*2500 | 1600*1500*2500 | 1950*1500*2500 | 1950*1750*2500 | |||||||||||||||||
10 | Door Opening Dimension mm(width*height) | 800*2100 | 800*2100 | 900*2100 | 1100*2100 | 1100*2100 | ||||||||||||||||||
11 | Shaft Size mm W*D*H |
2000*1750 | 2000*2000 | 2200*2100 | 2600*2200 | 2600*2500 | ||||||||||||||||||
12 | Deep Car1 | Car Size mm W*D*H |
- | 1200*1600*2500 | 1300*1750*2500 | 1700*1750*2500 | 1700*2000*2500 | |||||||||||||||||
13 | Opening mm W*D |
- | 800*2100 | 900*2100 | 1100*2100 | 1100*2100 | ||||||||||||||||||
14 | Shaft Size mm W*D |
- | 2000*2000 | 2200*2100 | 2600*2200 | 2600*2500 | ||||||||||||||||||
15 | Deep Car2 | Car Size mm W*D*H |
- | - | 1100*2100*2500 | 200*2400*2500 | 400*2400*2500 | |||||||||||||||||
16 | Opening mm W*D |
- | - | 900*2100 | 900*2100 | 900*2100 | ||||||||||||||||||
17 | Shaft Size mm W*D |
- | - | 2050*2500 | 2150*2750 | 2400*2800 | ||||||||||||||||||
18 | Travel Height | ≤45 | ≤65 | ≤75 | ≤45 | ≤65 | ≤75 | ≤110 | ≤45 | ≤65 | ≤75 | ≤110 | ≤120 | ≤45 | ≤65 | ≤75 | ≤110 | ≤120 | ≤45 | ≤65 | ≤75 | ≤110 | ≤120 | |
19 | Traction Machine Position | In the Machine Room | ||||||||||||||||||||||
20 | Overhead Height | 4200 | 4400 | 4450 | 200 | 4400 | 4450 | 4550 | 4200 | 4400 | 4450 | 4550 | 4850 | 4350 | 4450 | 4550 | 4650 | 4900 | 4350 | 4450 | 4550 | 4650 | 4900 | |
21 | Pit Depth | 1500 | 1570 | 1600 | 1500 | 1570 | 1600 | 1700 | 1500 | 1570 | 1600 | 1750 | 1900 | 1550 | 1650 | 1700 | 1750 | 1900 | 1550 | 1650 | 1700 | 1750 | 1900 | |
22 | Rated Power (KW) | 4.2 | 6.3 | 7.3 | 5.3 | 8 | 9.3 | 10.9 | 6.6 | 0 | 11.6 | 13.6 | 17 | 9.3 | 14 | 16.4 | 18.7 | 23.4 | 11.1 | 16.6 | 19.4 | 22.2 | 27.7 | |
23 | Rated Current (A) | 10 | 17 | 17 | 12 | 21 | 21 | 25 | 15 | 25 | 27 | 31 | 38 | 22 | 38 | 38 | 43 | 54 | 26 | 45 | 45 | 51 | 64 | |
24 | Starting Current (A) | 15 | 25.5 | 25.5 | 18 | 31.5 | 31.5 | 37.5 | 22.5 | 37.5 | 40.5 | 46.5 | 57 | 33 | 57 | 57 | 64.5 | 81 | 39 | 67.5 | 67.5 | 76.5 | 96 | |
25 | Power Supply Capacity (kVA) | 8 | 11 | 15 | 9 | 13 | 15 | 18 | 12 | 19 | 21 | 23 | 29 | 15 | 24 | 26 | 30 | 40 | 18 | 28 | 30 | 35 | 57 | |
26 | Brake Voltage V( ) | start at DC 110V maintain at DC 110V | ||||||||||||||||||||||
27 | Power Supply & Min. Wiring Requirement |
380V, 50Hz, 3-phase 5-wire,zero wire and ground wire separated, see requirements on the shaft plan drawing | ||||||||||||||||||||||
3*6mm+2*6mm² | 3*10mm²+2*6mm² | 3*6mm²+2*6mm² | 3*10mm²+2*6mm² | 3*16mm²2*10mm | 3*10mm²+2*6mm² | 3*25mm²+2*16mm | ||||||||||||||||||
Note: | ||||||||||||||||||||||||
1.Deep car is used for specified application, such as for stretcher delivery in evacuation occasions. | ||||||||||||||||||||||||
2.Car height is 2420mm when select standard C22 series ceiling (height 80mm). Car height may vary due to different type of ceilings. |